- High production tansfer machine
- Maximum flexibility for minimum set-up times
- Short cycle times
- No vibration due to the rigid machine design
- Temperature control for maximum precision
- Automatic bar feed system with 9 bars
- 8 independent 4 axis machining of the 6th side
- 3-axis re-taking station for the machining of the 6th side
- Rotary C-axis with "direct drive” technology
- Numerical control PC interface
Bumotec s1000C
Efficient machining with up to 32 tools - Maximum bar diameter 28 mm (optional 42 mm) - 9 Position automatic bar feed system (3,000 mm max.) - High speed spindles (10,000 rpm) - Optional high-frequency spindles - Optional high-pressure coolant
More than 6 time faster in production in comparison to a mono station machining center
Flyer
Bumotec Automation Solution
BUMOTEC MACHINING CENTERS INCLUDING AUTOMATION SOLUTIONS
4-axis horizontal transfer machine
The Bumotec s1000 C horizontal transfer machine was designed to manufacture prismatic parts from round or profiled bar stock. Small and complex components can be efficiently machined in medium to large batch sizes.
The machine is configured with seven 4-axis machining stations, each equipped with 4 machining spindles (2 horizontal and 2 vertical). The eight stations comprise a 4-axis cut off station with a single spindle. An optional ninth station allows the component to be re-clamped to allow the sixth side of the component to be machined with an additional 3-axis, 3 or 4 spindle machining unit. The machine is equipped with an automatic bar feed and quick change tool clamping system for optimum production rates.
Features:
- 9 machining stations
- Up to 36 tools integrated into the machine
- Chip to Chip in 0.5 sec
- 10.000min-1 on the tool
- High autonomy
Axis configuration
Innovative Solutions
- Fully open machining area for total operator accessibility
- Swarf evacuation through gravity due to the horizontal bar
- Total swarf recovery (precious metals) and removable coolant tank
- Control panel mounted on swiveling arm for operation from both sides
- High-pressure coolant system
- Oil treatment system, coolant temperature, control and filter system
- Swarf conveyor
- Paper filter system
- Automatic fire extinction system
- Automatic bar feed system (push or pull)
- Double workpieces holding arm for cut-off and transfer to the re-taking station, allowing machining of the sixth side in hidden time
- Fume extractor
- Tool breakage monitoring
- Swarf evacuator with paper filter
- Portable electronic hand wheel
- Mechanical probing system RENISHAW (tool length and center)
- Workpiece holding arm for cut-off and transfer to the re-taking station
- Chiller system for the electrical cabinet
- Automatic central grease system
- Automatic bar feed system (pull or push)
- Unloading carrousel with 9 individual trays
- Numerical command Bosch Rexroth MTX Performance
- Very easy control of the various movements, up to 37 simultaneous axes
- User-friendly control panel with man-machine interface via PC
- Possibility to connect the machine to a data-processing network for easy data exchange
- Error message and diagnostic system
- Very rigid welded and reinforced machine base
- Stabilized cast iron frame for high rigidity and precision
- CNC controlled index table, with 40° increments
- 3 horizontal spindles Ø. 35 mm or 2 horizontal and 2 vertical spindles Ø35mm
- Maximum spindle speed 10’000 rpm
- Drive motor 3.1 kW
- Machining of the 6th side
- Manual tool clamping
- 1 horizontal spindle Ø. 55 mm
- Maximum spindle speed 3’000 rpm
- Drive motor 3.1 kW
- Manual tool clamping
- Optimized coolant supply for saw blade (option)
- 2 horizontal and 2 vertical spindles Ø. 47 mm
- Maximum spindle speed 10’000 rpm
- Drive motor 3.1 kW
- Push button tool release
- Custom designed stations for specific needs
Everything from simply part storage to most complex flexible manufacturing systems – even of the largest machines. The Starrag Group makes Industry 4.0 a reality. Read more
Technical Data
| Number of machining station | 8/9 | |
| Numer of CNC-axis (max.) | 38 |
| Operations | unlimited | |
| Motor torque | Nm | 33 |
| Power | kW | 1,2 |
| Rapid travel | °/min | 72.000 |
| Clamping force | 6.000 N | |
| Indexing time from 0° à 180° | sec | 0,35 |
| Axis travels X/Y/Z | mm | 120/100/100 |
| Axis motor torque | Nm | 2,3 |
| Axis motor power | kW | 0,75 |
| Rapid travel | m/min | 15 |
| Max. spindle speed | rpm | 10.000 |
| Max. cut-off speed | rpm | 3.000 |
| Spindle motor torque | Nm | 2,6 |
| Spindle motor power | kW | 1,2 |
| Automatic tool holder clamping | ISO 20 | |
| Tool monitoring | Optional |
| Number of bars | 9 | |
| Max. bar length | m | 3 |
| Max. bar diameter | mm | 28/42 |
| Weight | kg | 9.500 |
Bumotec s1000C
